Technical Sheet of MDF Profiles
|
Technical characteristics |
Standard values upon technical specifications 36.1-32490658-001-2003 |
Actual values |
|
Maximum tolerance on nominal length, mm |
+ / - 3 |
Not found |
|
Maximum tolerance on nominal width and height, mm |
+ / - 1 |
Not found |
|
Physical configuration of face area |
Face area must be without swellings, exfoliations, scratches, spots, foreign impurities |
Face area doesn't contain swellings, exfoliations, scratches, spots, foreign impurities |
|
Mean density of raw MDF boards, kg/m3 |
750 |
788 |
|
Axial withdrawal of wrapping from the face, mPa Min |
0,6 |
0,7 |
|
Moisture content, % |
9 + / - 1 |
8 |
|
Temperature resistance |
After 24 hours in 70 C° oven there shouldn't be any changes in the profile face |
After 24 hours in 70 C° oven no changes were found out in the profile face |
|
Soiling resistance for cleaners, petrol, cafe, beet juice, 20% acetic acid, hydrogen peroxide, ethyl alcohol |
Resistant |
Resistant |
|
Water resistance |
Resistant |
Resistant |
|
Formaldehyde content, mg/m3 |
0,01 |
0,01 |
|
Methanol, mg/m3 |
0,5 |
Not found |
|
Ammonia, mg/m3 |
0,04 |
Not found |